Asus DS300j G2 Series User Manual page 71

v e S
IewInG the ncloSureS ummary
Enclosure Management includes information, status, settings and location. To access Enclosure Management:
1. Click the Device tab.
2. Click the Component List icon.
The following information is shown:
• Enclosure ID number
• Status
• Enclosure Type
• Status Description (specific components in need of attention, if any)
l e
ocatInG an ncloSure
To locate an enclosure:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure you want, then click the Locate button.
The enclosure LEDs blink for one minute.
v e I
IewInG ncloSure nformatIon
To view enclosure information:
1. Click the Device tab.
2. Click the Component List icon.
65
3. Click the Enclosure and click the View button.
Enclosure information includes:
• Enclosure ID
• Enclosure Type
• Enclosure Warning
Temperature Threshold
• Controller Warning
Temperature Threshold
• Max Number of Controllers
• Max Number of Fans
• Max Number of Temperature Sensors
• Max Number of Batteries
For information on Enclosure problems, see "Diagnosing an Enclosure Problem" on page <?>.
m e S
akInG ncloSure ettInGS
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the Settings button.
Enclosure settings include:
• Enclosure Warning Temperature Threshold [51-55]°C
• Enclosure Critical Temperature Threshold [56-68]°C
• Controller Warning Temperature Threshold [71-75]°C
• Controller Critical Temperature Threshold [76-80]°C
4. In the field provided, type the temperature in degrees C for each threshold value.
5. Click the Save button.
DS300f G2 Series User Manual
• Enclosure Critical
Temperature Threshold
• Controller Critical
Temperature Threshold
• Max Number of Physical Drive Slots
• Max Number of Blowers
• Max Number of Power Supply Units
• Max Number of Voltage Sensors