Asus DS300j G2 Series User Manual page 248

2. Click the arrows or type a new value in the PDO Remove Period field to change the interval.
120 seconds is the ASUS Storage-recommended default value.
3. Click the Apply button.
4. Click the OK button in the confirmation box.
The new setting takes effect immediately.
See also Path Verification.
P t r r
erformance ab efreSh ate
Refresh Rate refers to the number of seconds between refreshes of the data reported on the Performance tab.
c r r s
hAnging efresh Ate ettings
To change the refresh rate on the Performance tab:
1. Do one of the following actions:
• Click the Advanced Settings icon.
• From the Operations menu, choose Advanced Settings.
The Advanced Settings dialog box appears with the MPIO Parameters tab displayed.
2. Click the General tab.
3. Under Refresh Rate, click the arrows or type a new value in the Seconds field to change the interval.
5 seconds is the default value.
4. Click the Apply button.
The new setting takes effect immediately.
See also:
• Viewing LUN Performance Statistics
• Viewing Path Performance Statistics
r r c
ounD obIn ount
When you set your path Load Balance Policy to Round Robin, the I/Os follow all active paths, changing paths at
the specified I/O count. You can set the I/O count in the General tab of the Advanced Settings dialog box.
242
c r r c
hAnging the ound obin ount
To change Round Robin Count settings:
1. Do one of the following actions:
• Click the Advanced Settings icon.
• From the Operations menu, choose Settings icon.
The Advanced Settings dialog box appears with the MPIO Parameters tab displayed.
2. Click the General tab.
3. Under Round Robin Count, click the arrows or type a new value in the I/Os per Path field to change the
count.
10 I/Os is the default value.
4. Click the Apply button.
The new setting takes effect immediately.
See also:
• Load Balance Policy
• Viewing LUN Performance Statistics
• Viewing Path Performance Statistics
r o
efreShInG the bJectS
Use this function after making an addition or deletion to your LUNs or paths.
To refresh the objects, do one of the following actions:
• From the Operations menu, choose Refresh.
• Click the Refresh icon.
PerfectPath automatically displays all reported changes. However, some actions are not reported.
The Refresh action enables you to see the latest information.
See also:
• Automatic Load Balancing for Failover Policy
• Load Balance Policy
• Path Verification
• PDO Removal
DS300f G2 Series User Manual