C Reating A U Ser; M Aking U Ser S Ettings; C Hanging U Ser P Asswords - Asus DS300j G2 Series User Manual

c u
reatInG a Ser
This action requires Administrator or Super User privileges.
To create a user:
1. Click the Administration tab.
2. Click the User Management icon.
3. Click the Add User button.
4. In the Add User dialog box, enter the information in the fields provided:
• Name – This is the user's login name
• Display Name
• Password
• Retype Password
• User Email – Required for event notification
5. Choose a privilege level from the drop-down menu. See the table below for a description of the privilege
types.
6. (Optional) Uncheck the Enable box to disable this User account.
7. Click the Save button. The user is added to the list.
Important
For this user to receive event notification, Click the new user and click the Subscription button.
User Privileges
Level Meaning
View Allows the user to see all status and settings but not to make any changes
Maintenance Allows the user to perform maintenance tasks including Rebuilding, PDM, Media
Patrol, and Redundancy Check
Power Allows the user to create (but not delete) disk arrays and logical drives, change RAID
levels, change stripe size; change settings of components such as disk arrays, logical
drives, physical drives, and the controller
Super Allows the user full access to all functions including create and delete users and
changing the settings of other users, and delete disk arrays and logical drives.
The default "administrator" account is a Super User
70
m u S
akInG Ser ettInGS
This action requires Administrator or a Super User privileges.
To make user settings:
1. Click the Administration tab.
2. Click the User Management icon.
3. In the User list, click the user you want, then click Settings .
4. Make settings changes as required:
• For the Enable box, check to enable this user account, uncheck to disable this user account
• In the User Settings dialog box, enter a new
• Choose a new Privilege level from the drop-down menu.
See the table on the next page.
5. Click the Save button.
c u P
hanGInG Ser aSSworDS
This action requires Administrator or Super User privileges.
To change a user's password:
1. Click the Administration tab.
2. Click the User Management icon.
3. In the User list, click the user you want, then click Change Password .
4. In the Change Password dialog box, enter the information in the fields provided:
• New Password
• Retype Password
5. Click the Save button.
DS300f G2 Series User Manual
or address
Display Name User Email