Asus DS300j G2 Series User Manual page 31

scsi sAn d P
i AtA Ath
Each ASUS DS300f G2 controller has four (4) RJ45 iSCSI data port connectors. See "Figure 2 - 15: iSCSI data
and management ports on the RAID controller" on page 24
To establish the data path:
1. Connect Ethernet cables between the iSCSI NIC in both host PCs or servers and the GbE network switch.
See "Figure 2 - 16: iSCSI SAN data connections" on page 25.
2. Connect an Ethernet cable between at least one iSCSI data port on the left RAID controller and the GbE
network switch.
3. Connect an Ethernet cable between at least one iSCSI data port on the right RAID controller and the GbE
network switch.
If you have multiple ASUS DS300f G2 subsystems, host PCs or servers, repeat steps 1 through 3 as
required.
25
Figure 2 - 16: iSCSI SAN data connections
DS300f G2 Series User Manual