Asus DS300j G2 Series User Manual page 258

#> uname -a
2. Do one of the following actions:
• Remove the currently installed multipath tool.
rpm -ev multipath-tools
Install the appropriate new multipath-tool RPM package.
i586
rpm -ivh multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm
x86_64
rpm -ivh multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm
• Force install the appropriate new multipath-tool RPM package.
i586
#> rpm -ivh -force multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm
x86_64
#> rpm -ivh -force multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm
3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.
#> cp multipath.conf-ASUS DS300f G2-alua-sles10-sp3 /etc multipath.conf
4. Check the multipath configuration.
chkconfig multipathd on
chkconfig multipathd
(shows the status of multipathd)
chkconfig boot.multipath on
chkconfig boot.multipath
(shows the status of boot.multipath)
5. Reboot the ASUS DS300f G2.
6. Check the multipath configuration.
Multipath -ll (multipath -v4)
S Se l SleS 11
u Inux
To support ALUA within SLES 11:
1. Determine your system architecture, i586 or x86_64.
#> uname -a
2. Install the appropriate path priority tool library.
• i586
#> rpm -ivh multipath-ASUS Storage-suse11-0.4.8-1.i586.rpm
• x86_64
252
#> rpm -ivh multipath-ASUS Storage-suse11-0.4.8-1.x86_64.rpm
3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.
#> cp multipath.conf-ASUS DS300f G2-alua-sles11 /etc multipath.conf
4. Check the multipath configuration.
chkconfig multipathd on
chkconfig multipathd
(shows the status of multipathd)
5. Reboot the ASUS DS300f G2.
6. Check the multipath configuration.
Multipath -ll (multipath -v4)
S Se l SleS 11 SP1
u Inux
Not updated with Novell SP1 patches
If you did NOT update with Novell SLES 11 SP1 patches:
1. Determine your system architecture, i586 or x86_64.
#> uname -a
2. Install the appropriate patched scsi_dh_alua.ko device handler.
• i586
#> rpm -ivh --force scsi_dh_alua_sles11sp1-2-1.i586.rpm
• x86_64
#> rpm -ivh --force scsi_dh_alua_sles11sp1-2-1.x86_64.rpm
3. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.
#> cp multipath.conf.alua-sles11sp1 /etc multipath.conf
4. Check the multipath configuration.
chkconfig multipathd on
chkconfig multipathd
(shows the status of multipathd)
5. Reboot the ASUS DS300f G2.
6. Check the multipath configuration.
Multipath -ll (multipath -v4)
u n sP1
PdAted with ovell PAtches
If you updated with Novell SLES 11 SP1 patches:
DS300f G2 Series User Manual