Asus DS300j G2 Series User Manual page 213

v nvram e
IewInG ventS
This screen displays a list of and information about 63 most important events over multiple subsystem startups.
To display NVRAM events:
1. From the Main Menu, highlight Event Viewer and press Enter .
2. Highlight NVRAM Events and press Enter .
The log of NVRAM Events appears. Events are added to the top of the list. Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – See the Table on the previous page.
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
3. Press the up and down arrow keys to scroll through the log.
c r c
heckInG a ePorteD omPonent
In this example, let us check disk array status.
1. Open the CLU.
2. Highlight Disk Array Management and press Enter .
3. Observe the status of your disk arrays.
DaId Alias OpStatus CfgCapacity
-------------------------------------------------------------------------------------------
0 DA0 OK 75.44GB
1 DA1 Degraded 189.06GB
2 DA2 OK 73.57GB
207
FreeCapacity MaxContiguousCap
66.06GB 66.06GB
179.68GB 179.68GB
64.20GB 64.20GB
At this point, you can highlight the Degraded array and press Enter to see more information. See below.
Disk Array ID: 1
OperationalStatus : Degraded
FreeCapacity: 179.68 GB
SupportedRAIDLevels: 0 5 10 1E
Disk Array Alias : DA1
MediaPatrol : Enabled
PDM : Enabled
Transport
Rebuild
Predictive Data Migration
Transition
Dedicated Spare Drives in the Array
Physical Drives in the Array
Logical Drives in the Array
[Locate Disk Array]
Save Settings [CTRL-A]
Restore Settings [CTRL-R]
Return to Previous Menu
From this screen:
• Highlight Physical Drives in the Array and press Enter to identify the failed disk drive
• Highlight Rebuild and press Enter to rebuild the array after you replace the failed disk drive
DS300f G2 Series User Manual
Physical Capacity: 189.06GB
MaxContiguousCapacity: 11.18GB
ConfigurableCapacity: 179.68GB