v
ScSI S
I
IewInG I
eSSIon
nformatIon
To view a list of iSCSI sessions:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI Sessions and press Enter .
3. Highlight the session you want and press Enter .
iSCSI session information includes:
• Session ID – ID number of the session
• Status – Active or inactive
• Initiator Name – SCSI qualified name (iqn)
• Portal IP – IP address of the portal
• Device Type – Initiator or target
• Target Portal Group – ID number
• TSIH – Target session identifying handle
• Execution Throttle – Max number of
outstanding commands on any one port
• Max Rcv Data Seg Length – Receive data
segment length
• First Burst Length – In bytes
• Default Time to Wait – In seconds
• Immediate Data – Enabled or disabled
• Header Digest – Enabled or disabled
• CHAP Authentication Type – None, Local,
Peer
151
(clu)
• Portal ID – ID number of the portal
• Target Alias
• Target Name – iSCSI qualified name (iqn)
• Initiator IP – IP address of the initiator
• Initiator Source Port – ID number
• ISID – Initiator session ID number
• Max Outstanding R2T – Number of PDUs
ready to transfer
• Max Burst Length – In bytes
• Default Time to Retain – In seconds
• Initial R2T – Enabled or disabled
• Data Digest – Enabled or disabled
• Data PDU in Order – Enabled or disabled
• Data Seq in Order – Enabled or disabled
• Device Access Control – Enabled or disabled
v
ScSI
SnS I
(clu)
IewInG I
I
nformatIon
Internet Storage Name Service (iSNS) is a protocol used to facilitate the automated discovery, management,
and configuration of iSCSI and Fibre Channel devices on a TCP/IP network.
To view iSNS information:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI iSNS Options and press Enter .
The current iSNS options appear. Information includes:
• iSNS – Enabled or disabled
• iSNSIPAddress – IP address of the iSNS server
• iSNSPort – iSNS port number (1 to 65535) 3205 is the default and recommended number
Items marked with an asterisk (*) are adjustable under Making iSCSI Portal Settings (CLU).
m
ScSI
SnS S
(clu)
akInG I
I
ettInGS
To make iSNS settings:
1. From the Main Menu, highlight iSCSI Management and press Enter .
2. Highlight iSCSI iSNS Options and press Enter .
The current iSNS options appear.
3. Highlight iSNS Settings and press Enter .
4. Highlight iSNS and press the Spacebar to toggle between Enable and Disable.
5. If you chose Enable:
• Enter an IP address.
• Enter a Port number. 3205 is the default and recommended number.
To change a value, highlight the item, press Backspace to delete the current value and type a new value.
6. Highlight Save Settings and press Enter .
7. Press Y to acknowledge possible interruption of iSCSI services.
8. Press Y again to confirm the changes.
9. Highlight Return to Previous Menu and press Enter to return to the portal list.
DS300f G2 Series User Manual