Deleting An Iscsi Session; Making Iscsi Isns Settings - Asus DS300j G2 Series User Manual

Information includes:
• Session ID – ID number of the session
• Status – Active or inactive
• Target Alias
• Initiator Name – iSCSI qualified name (iqn)
• Portal IP – IP address of the portal
• Device Type – Initiator or target
• Target Portal Group – ID number
• TSIH – Target session identifying handle
• Execution Throttle – Max number of
outstanding commands on any one port
• Max Outstanding R2T – Number of PDUs
ready to transfer
• Default Time to Retain – In seconds
• Max Burst Length – In bytes
• Initial R2T – Enabled or disabled
• Data Digest – Enabled or disabled
• Data PDU in Order – Enabled or disabled
D ScSI S
eletInG an I eSSIon
To delete an iSCSI session:
1. Click the Device tab.
2. Click the iSCSI Managemen t icon.
3. Click the Session tab.
4. Click the iSCSI session you want and click the Delete button.
5. Type " " in the field provided, then click the Confirm button.
confirm
115
• Portal ID – ID number of the portal
• Keep Alive – Enabled or disabled
• Target Name – iSCSI qualified name (iqn)
• Initiator IP – IP address of the initiator
• Device Access Control – Enabled or disabled
• Initiator Source Port – ID number
• ISID – Initiator session ID number
• Max Rcv Data Seg Length – Receive data segment
length
• First Burst Length – In bytes
• Default Time to Wait – In seconds
• Immediate Data – Enabled or disabled
• Header Digest – Enabled or disabled
• CHAP Authentication Type – None, Local, Peer
• Data Seq in Order – Enabled or disabled
v ScSI SnS I
IewInG I I nformatIon
To view information about iSNS:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the iSNS tab.
The information includes:
• Auto iSNS IP – Yes means the IP address is assigned automatically
• iSNS Enabled – Yes means the iSNS feature is enabled*
• iSNS Server IP Address – IP address of the iSNS Server*
• iSNS Port – 3205 is the default and recommended value*
Items marked with an asterisk (*) are adjustable under Making iSCSI iSNS Settings.
m ScSI SnS S
akInG I I ettInGS
To make iSNS settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the iSNS tab.
4. Click the iSNS Settings button.
5. Make settings changes are required:
• Check the box to enable iSNS. Uncheck to disable.
• Enter the iSNS server IP address.
• Enter a new iSNS Port number. The range is 1 to 65535.
6. Click the Submit button.
DS300f G2 Series User Manual