D Eleting A U Ser - Asus DS300j G2 Series User Manual

D u
eletInG a Ser
This action requires Administrator or Super User privileges
.
Note
You cannot delete the Administrator.
To delete a user:
1. Click the Administration tab.
2. Click the User Management icon.
3. In the User list, click the user you want, then click the Delete button.
4. In the Confirmation box, type the word "
S u e S
ettInG Ser vent ubScrIPtIonS
By default, all users have event notification:
• Enabled
• Set to the Major (severity) level for all events
Subscribing users receive notification of events at the chosen severity level and all higher levels.
Note
Each user must have a valid Email address to receive events. See "Making User Settings" below.
Changing a user subscription requires Administrator or Super User privileges.
To set a user event subscription:
1. Click the Administration tab.
2. Click the User Managemen t icon.
3. In the User list, click the user you want, then click the Subscription button.
4. Make settings changes as required:
• For the Enable Event Notification box, check to enable for this user, uncheck to disable.
• Click to change the priority options for each category of event.
5. Click the Save button.
71
" in the field provided and click the Confirm button.
confirm
I u D
mPortInG a Ser atabaSe
You can save the user information and settings from one ASUS DS300f G2 RAID subsystem, export it, and then
import it to automatically configure your other ASUS DS300f G2 RAID subsystems.
Caution
Importing a user database overwrites the current users and user settings on your
ASUS DS300f G2 subsystem.
To import a user database:
1. Click the Administration tab.
2. Click the Import/Export icon.
3. Click the Import option.
4. Choose User Da tab ase from the Type drop-down menu.
5. Click the Browse button and navigate to the user database file and click the OK button.
6. Click the Next button.
The system verifies that the file is a valid user database and displays any errors or warnings.
7. Click the Submit button to continue.
8. In the Confirmation box, type the word "
The user database is imported and applied automatically.
DS300f G2 Series User Manual
" in the field provided and click the Confirm button.
confirm