Asus DS300j G2 Series User Manual page 182

r S
eStartInG a ubSyStem
This function shuts down the subsystem and then restarts it.
Important
Do NOT turn off the power supply switches on the RAID subsystem or JBOD expansion units.
To restart the subsystem:
1. Click the Administration tab.
2. Click the S ubsystem Information icon.
3. Click the Shutdown/Restart button.
4. Click the Restart button.
5. Type the word " " in the field provided.
confirm
6. Click the Confirm button.
When the controller shuts down, your ASUS Storage Management connection is lost.
7. Wait no less than two minutes.
8. In your browser, click Logout in the ASUS Storage Management Header, then log in again.
If you cannot log in immediately, wait 30 seconds and try again.
176
DS300f G2 Series User Manual