Working With The Event Viewer (Clu) - Asus DS300j G2 Series User Manual

w e
orkInG wIth the vent
Working with the Event Viewer includes the following functions:
• "Viewing Runtime Events (CLU)" on page 155
• "Clearing Runtime Events (CLU)" on page 155
• "Viewing NVRAM Events (CLU)" on page 155
• "Clearing NVRAM Events (CLU)" on page 155
The Event Viewer displays log of subsystem events. Events are classified as:
• Runtime Events – A list of and information about the 1023 most recent runtime events recorded since the
subsystem was started
• NVRAM Events – A list of and information about the most important events over multiple subsystem
startups. NVRAM events are stored in non-volatile memory
Event Severity Levels
Level Description
Fatal Non-recoverable error or failure has occurred.
Critical Action is needed now and the implications of the condition are serious.
Major Action is needed now.
Minor Action is needed but the condition is not a serious at this time.
Warning User can decide whether or not action is required.
Information Information only, no action is required.
v r e (clu)
IewInG untIme ventS
To display Runtime Events:
1. From the Main Menu, highlight Event Viewer and press Enter .
The log of Runtime Events appears. Events are added to the top of the list. Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – See the table above.
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
2. Press the up and down arrow keys to scroll through the log.
155
v (Clu)
Iewer
c r e (clu)
learInG untIme ventS
To clear the Runtime Event log:
1. From the Main Menu, highlight Event Viewer and press Enter .
2. Highlight Clear Runtime Event Log and press Enter .
3. Press Y to confirm.
v nvram e (clu)
IewInG ventS
This screen displays a list of and information about the most important events over multiple subsystem startups.
To display NVRAM events:
1. From the Main Menu, highlight Event Viewer and press Enter .
2. Highlight NVRAM Events and press Enter .
The log of NVRAM Events appears. Events are added to the top of the list. Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – See the table on the previous page.
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
3. Press the up and down arrow keys to scroll through the log.
c nvram e (clu)
learInG ventS
To clear the Runtime Event log:
1. From the Main Menu, highlight Event Viewer and press Enter .
2. Highlight NVRAM Events and press Enter .
3. Highlight Clear NVRAM Event Log and press Enter .
4. Press Y to confirm.
DS300f G2 Series User Manual