Asus DS300j G2 Series User Manual page 259

1. Copy the ASUS Storage-supplied multipath.conf file to the /etc directory.
#> cp multipath.conf.alua-sles11sp1 /etc multipath.conf
2. Check the multipath configuration.
chkconfig multipathd on
chkconfig multipathd
(shows the status of multipathd)
3. Reboot the ASUS DS300f G2.
4. Check the multipath configuration.
Multipath -ll (multipath -v4)
f c hbA Asus ds300 g2
ibre hAnnel to f
If you plan to use connect a Fibre Channel HBA card to ASUS DS300f G2 RAID subsystem, you must change
the remote port (rport) configuration.
1. Change the dev_loss_tmo value as large as possible.
Example: 0x7fffffff.
2. Change the fast_io_fail_tmo value as 30.
253
rpM p d
aCkaGes and
ASUS Storage provides RPM packages and multipath.conf files for Linux on the support: http://www.ASUS
Storage.com/support/.
A ASUS Storage Linux package contains:
• package folder – RPM packages for the Linux OS
• multipath-conf folder
• ALUA folder – Configuration file and instructions for ALUA, if supported
• normal folder – Configuration file for general multipathing
Important
Please read the How to Configure document in the ALUA folder for the latest information before
beginning your setup.
•
The table below lists the content of each ASUS Storage Linux package:
Package Folder Contents
SLES10-SP2 normal multipath.conf-ASUS DS300f G2-normal-sles10-sp2
SLES10-SP3 package multipath-tools-0.4.7-34.50.10.ass.fix.i586.rpm
multipath-tools-0.4.7-34.50.10.ass.fix.x86_64.rpm
ALUA multipath-conf-ASUS DS300f G2-alua-sles10-sp3
How to Configure MPIO SLES10 SP3.doc
normal multipath-conf-ASUS DS300f G2-normal-sles10-sp3
SLES11 packages multipath-ASUS Storage-suse11-0.4.8-i586.rpm
multipath-ASUS Storage-suse11-0.4.8-x86_64.rpm
ALUA multipath-conf-ASUS DS300f G2-alua-sles11
How to Configure MPIO SLES 11.doc
normal multipath-conf-ASUS DS300f G2-normal-sles11
SLES11-SP1 packages scsi_dh_alua_sles11sp1-2-1.i586.rpm
scsi_dh_alua_sles11sp1-2-1.x86_64.rpm
scsi_dh_alua_sles11sp1-2-1.src.rpm
ALUA multipath.conf.alua-sles11sp1
How to Configure MPIO SLES 11sp1.doc
normal multipath.conf-ASUS DS300f G2-normal-sles11sp1
How to Configure MPIO SLES 11sp1.doc
RHEL-5.3 normal multipath.conf-ASUS DS300f G2-normal-rhel5-3
DS300f G2 Series User Manual
l MpIo
oCuMents for Inux