Asus DS300j G2 Series User Manual page 63

I c S
mPortInG a onfIGuratIon crIPt
You can write a CLI configuration script to automatically configure your ASUS DS300f G2 subsystem. The script
must be a plain, non-encrypted text file. From there, you can import the script from the Host PC and perform the
configuration automatically.
Cautions
Do NOT attempt to write or modify a configuration script until you receive guid-
ance from Technical Support. See "Frequently Asked Questions" on page <?>.
Importing a configuration script overwrites the current settings on your ASUS
DS300f G2 subsystem.
Or you can save the configuration from one ASUS DS300f G2 RAID subsystem, export it, and then import it to
automatically configure your other ASUS DS300f G2 RAID subsystems. To import a configuration script:
1. Click the Administration tab.
2. Click the Import/Export icon.
3. Click the Import option.
4. Choose Configuration Script from the Type drop-down menu.
5. Click the Browse button and navigate to the configuration script and click the OK button.
6. Click the Next button.
The system verifies that the file is a valid configuration script and displays any errors or warnings.
7. Click the Submit button to continue.
8. In the Confirmation box, type the word "
The configuration script is imported and applied automatically.
e c S
xPortInG a onfIGuratIon crIPt
You can save the configuration from one ASUS DS300f G2 RAID subsystem, export it, and then import it to
automatically configure your other ASUS DS300f G2 RAID subsystems.
To export a configuration script:
1. Click the Administration tab.
2. Click the Import/Export icon.
3. Click the Export option.
57
" in the field provided and click the Confirm button.
confirm
4. Choose Configuration Script from the Type drop-down menu.
5. Click the Submit button.
6. In the Open dialog box, click the Save File option, then click the OK button.
The file is saved to your PC as "Configscript.txt".
Cautions
Do NOT attempt to write or modify a configuration script until you receive guid-
ance from Technical Support. See "Frequently Asked Questions" on page <?>.
r S
eStartInG the ubSyStem
This function shuts down the subsystem and then restarts it.
To restart the subsystem:
1. Click the Administration tab.
2. Click the Subsystem Information icon.
3. Choose the option to apply the restart to the
4. Click the Shutdown/Restart button.
5. Click the Restart button.
6. Type the word "confirm" in the field provided.
7. Click the Confirm button.
When the controller shuts down, your ASUS Storage Management connection is lost.
8. Wait at least two minutes.
9. In your browser, click Logout in the ASUS Storage Management Header, then log in again.
If you cannot log in immediately, wait 30 seconds and try again.
DS300f G2 Series User Manual
, only or
Subsystem Controller 1 Controller 2
only.