Asus DS300j G2 Series User Manual page 89

M n s
Aking etsend ettings
To change Netsend service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Netsend service and click the Settings button.
4. Choose a startup type,
• Automatic – Starts and runs with the subsystem.
• Manual – (default) You start the service when you need it.
5. Click the Save button.
6. Click the Confirm button.
A n s A
dding etsend erver ccounts
To add a Netsend server account:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Netsend service and click the Settings button.
4. Enter the recipient server IP address in the field provided.
5. Choose a recipient filter (event severity level).
See the table on the next page.
6. Click the Add button.
The recipient server is added to the list.
7. Click the Save button.
8. Click the Confirm button.
83
Event Severity Levels
Level Description
Fatal Non-recoverable error or failure has occurred.
Critical Action is needed now and the implications of the condition are serious.
Major Action is needed now.
Minor Action is needed but the condition is not a serious at this time.
Warning User can decide whether or not action is required.
Information Information only, no action is required.
d n s A
eleting etsend erver ccounts
To delete a Netsend server account:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Netsend service and click the Settings button.
4. In the Message Event Severity Filter list, click the recipient server you want to delete.
5. Click the Trash icon.
The recipient server is deleted.
6. Click the Save button.
7. Click the Confirm button.
DS300f G2 Series User Manual