Working With Software Management (Clu) - Asus DS300j G2 Series User Manual

w s
orkInG wIth oftware
Software Management includes the following functions:
• "Making Email Settings (CLU)" on page 163
• "Making SLP Settings (CLU)" on page 163
• "Making Web Server Settings (CLU)" on page 163
• "Making SSH Settings (CLU)" on page 164
• "Making SNMP Settings (CLU)" on page 164
• "Managing SNMP Trap Sinks (CLU)" on page 164
• "Making Netsend Settings (CLU)" on page 165
• "Managing Netsend Recipients (CLU)" on page 165
m e S (clu)
akInG maIl ettInGS
By default, Email service is set to Automatic and its normal status is Started.
To make Email service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight Email and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• SMTP server IP address or server name
• Server Port number (25 is the default)
6. Highlight Authentication and press the spacebar to toggle between Yes and No .
If you selected Yes, type in a User name and Password in the fields provided.
7. The following items are optional but recommended. Highlight and press the backspace key to erase the
current value, then type the new value:
• Sender's email address
• Subject Line for the email message
8. Press Control-A to save your settings.
163
M (Clu)
anaGeMent
To start, stop or restart the Email service, highlight Start , Stop or Restart and press Enter .
m SlP S (clu)
akInG ettInGS
By default, SLP service is set to Automatic and its normal status is Started.
To make SLP service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight SLP and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Press Control-A to save your settings.
To start, stop or restart the SLP service, highlight Start , Stop , or Restart and press Enter .
m w S S (clu)
akInG eb erver ettInGS
By default, Web Server service is set to Automatic and its normal status is Started.
To make Web Server service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• HTTP Port (80 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
6. Highlight SSL and press the spacebar to toggle between Enabled and Disabled .
7. Highlight HTTPS Port and press the backspace key to erase the current value, then type the new value. 443
is the default.
8. Press Control-A to save your settings.
To start, stop or restart the service, highlight Start , Stop , or Restart and press Enter .
DS300f G2 Series User Manual