Asus DS300j G2 Series User Manual page 163

D I (clu)
eletInG an nItIator
Caution
If you delete an initiator, you delete the LUN map associated with that initiator.
Verify that the LUN map is no longer needed before deleting the initiator
To delete an initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight LUN Mapping and press Enter .
3. Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight Delete Marked Initiators and press Enter .
5. Press Y to confirm the deletion.
v l lun m (clu)
IewInG a ISt of aPS
To view a list of LUN maps:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight LUN Mapping and press Enter .
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press Enter . Then highlight an initiator and press Enter .
The list of logical drives with corresponding LUN maps appears.
a lun m (clu)
DDInG a aP
For FC & iSCSI systems, you can set up an Initiator LUN map.
You can set up the LUN map type on the same subsystem but only one LUN map type can be active at a time.
A maximum of 256 logical drives can be mapped to an FC initiator or to an iSCSI initiator.
To assign a LUN to an FC or iSCSI initiator, add the initiator first. See Adding an Initiator (CLU).
LUN mapping must be enabled in order to map a LUN. See Enabling LUN Mapping (CLU).
M lun fc i
APPing A to An nitiAtor
To map a LUN to an FC initiator:
157
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight LUN Mapping and press Enter .
3. Do the following actions:
• Highlight LUN Mapping: Initiators and press Enter . Then highlight an initiator and press Enter .
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then type the LUN you want to assign
to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press Control-AR to restore the current LUN.
5. Press Control-A to save the LUN map.
DS300f G2 Series User Manual