Asus DS300j G2 Series User Manual page 145

6. Highlight the following parameters and press the spacebar to toggle though the available choices:
• Stripe size – Press the spacebar to choose: 64 KB, 128 KB, 256 KB, 512 KB, or 1 MB.
• Sector size – Press the spacebar to choose: 512 B; 1 KB, 2 KB, or 4 KB.
• Write Policy – Press spacebar to choose: Write Back or Write Through.
• Read Policy – Press spacebar to choose: No Cache, Read Cache, or Read Ahead Cache.
7. Highlight P referred Controller ID and press the spacebar to toggle among 1 , 2 , or Automatic .
8. Highlight PerfectRebuild and press the spacebar to toggle Enable or disable.
9. RAID 30, 50 and 60 only. Highlight Number of Axles and press the spacebar to choose the number of axles.
10. Highlight Save Logical Drive and press Enter .
Note
If you did not use all of the available capacity of the disk array, you can create an
additional logical drive at this point.
D l D (clu)
eletInG a oGIcal rIve
Caution
When you delete a logical drive, you delete all the data it contains. Back up all
important data before deleting a logical drive.
To delete a logical drive from a disk array:
1. From the Main Menu, highlight Disk Array Management and press Enter .
2. Highlight the disk array that contains the logical drive you want to delete and press Enter .
3. Highlight Logical Drives in the Disk Array and press Enter .
4. Highlight the logical drive you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
5. Highlight Delete Marked Logical Drives and press Enter .
6. Press Y to confirm the deletion.
Press Y again to re-confirm.
139
v l D I (clu)
IewInG oGIcal rIve nformatIon
To view logical drive information:
1. From the Main Menu, highlight Logical Drive Management and press Enter .
2. Highlight the logical drive you want and press Enter .
The information and settings screen appears.
3. Highlight any of the following and press Enter to view more information:
• Check Table – Read Check, Write Check, and Inconsistency Check Tables
• Logical Drive Statistics
v l D S (clu)
IewInG oGIcal rIve tatIStIcS
To view logical drive information:
1. From the Main Menu, highlight Logical Drive Management and press Enter .
2. Highlight the logical drive you want and press Enter .
The information and settings screen appears.
3. Highlight Logical Drive Statistics and press Enter .
The statistics screen appears.
To clear logical drive statistics, see "Clearing Statistics (CLU)" on page 167.
v l D c t
IewInG the oGIcal rIve heck able
To view logical drive information:
1. From the Main Menu, highlight Logical Drive Management and press Enter .
2. Highlight the logical drive you want and press Enter .
3. Highlight Check Table and press Enter .
4. Highlight one of the following options and press Enter :
• Show All Records
• Read Check Table
• Write Check Table
• Inconsistent Check Table
DS300f G2 Series User Manual
(clu)