Asus DS300j G2 Series User Manual page 170

m t S (clu)
akInG elnet ettInGS
By default, Telnet service is set to Manual and its normal status is Stopped.
To make Telnet service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight Telnet and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• Port number (2300 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
• Maximum number of connections (4 is the default)
6. Press Control-A to save your settings.
To start, stop or restart the Telnet service, highlight Start , Stop , or Restart and press Enter .
m SSh S (clu)
akInG ettInGS
By default, Secure Shell (SSH) service is set to Automatic and its normal status is Started.
To make SSH settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight SSH and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• Port number (22 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
• Maximum number of connections (4 is the default)
6. Press Control-A to save your settings.
164
m SnmP S (clu)
akInG ettInGS
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal status is
Started.
To make SNMP service settings:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight SNMP and press Enter .
4. Highlight Startup Type and press the spacebar to toggle between Automatic and Manual .
5. Highlight the following and press the backspace key to erase the current value, then type the new value:
• Port Number – 161 is the default
• System Name – (optional) Type a system name in this field
• System Location – Type a country name in this field
• System Contact – Type the email address of your system administrator in this field
• Read Community – Type a community name in this field
• Write Community – private (no change possible)
6. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight Start , Stop , or Restart and press Enter .
m SnmP t S (clu)
anaGInG raP InkS
v l t s
iewing A ist of rAP inks
To create a trap sink:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Software Management and press Enter .
3. Highlight SNMP and press Enter .
4. Highlight Trap Sinks and press Enter .
A list of the current trap sinks appears.
DS300f G2 Series User Manual