Adjusting The Color; Visualcal; Print Limits Page - Xerox Phaser 790 Documentation

Adjusting the color

Adjusting the color
Perform this procedure if you have color problems such as insufficient
amounts of one or more colors, or excessive amounts of one or more colors.
If a message to replace a Dry Ink Color Cartridge is displayed on the Printer
Control Panel, replace the cartridge BEFORE performing this adjustment.

VisualCal

There are three parts to the VisualCal adjustment. Do not skip any steps or
perform any part out of sequence.
If you wish to stop the VisualCal adjustment you may press the Clear/Stop
button at any time. Pressing the Clear/Stop button returns the menu to
READY.

1. Print Limits Page

1. Ensure that READY is displayed on the Printer Control Panel.
2. Press the Menu button repeatedly until VISUALCAL is displayed.
3. Press the Item/Enter button. PRINT LIMITS YES is displayed on the
Control Panel screen.
4. Press the Item/Enter button. PRINTING LIMITS PAGE is displayed and
after a few moments, the page is delivered to the Printer Output Tray.
5. Under your normal lighting, study the Black Start row.
a.
View the page at an angle for the best results.
b.
c.
d.
Xerox Phaser 790
Select the left-most circle that you can distinguish from the
background and draw a circle around it.
Select the left-most circle that you can distinguish from the
background on the next row, Black End, and draw a circle around it.
If you cannot see any circle in the row, write 9 next to the row.
If you see all the circles in a row, write 0 next to the row.
23. Problem Solving
23-27