Changing Global Settings; To Change The Global Settings - Xerox Phaser 790 Documentation

Changing Global Settings

Use the Global Settings button to open a dialog box where you can set the
default simulation method and the profile used for RGB Separation. You can
also access information on how all the profiles are applied to color data in a
job.

To Change the Global Settings

1. Launch ColorWise Pro Tools and click Profile Manager.
2. Click Global Settings at the top right corner.
3. Choose Full or Quick for the Default CMYK Simulation Method.
4. Choose Simulation or Output for RGB Separation.
Although the RGB Separation feature is primarily intended for RGB, it
can also apply to data in the Lab color space or data that uses
PostScript Color Management.
5. To see a diagram of how color settings affect print jobs, click the
question mark (?) button at the bottom left-hand side.
The diagram is illustrative and does not include selectable options. Click
OK to close.
6. Click Apply to apply and changes you have made. Click OK to close the
window.
Xerox Phaser 790
22. Using ColorWise Pro Tools
22–17