Adjusting Color Density And Balance; Printing A Test Page - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Adjusting Color Density and Balance

Adjusting Color Density and Balance
Over the life of the printer, colors may change. For example, reds may begin to take on a
purple cast, or blues may take on a green cast. This happens during the normal use of a
color printer and can be easily remedied by using the color adjustment procedure
described in this section.
Caution
Use caution when making adjustments. Once you have made an adjustment, you
cannot undo the changes. You can return the values to the factory defaults.
Note
Perform this procedure monthly to help correct any color shifts.
This front panel procedure involves printing a test page and adjusting the densities and
colors based on the appearance of the test page. You may need to repeat this procedure
and test your adjustments until you achieve the desired effect.
Note
At any time, you can reset the printer to the factory defaults by selecting Color
Defaults from the Color Adjust Menu.
Refer to the Front Panel Menus section on page 40 for more information about the front
panel.

Printing a Test Page

1. Press Menu Up or Menu Down until you see:
2. Press Item Up or Item Down.
You will see:
3. Press Enter.
The printer prints the Color Balance test page.
72
Menus
Color Adjust Menu
Color Adjust Menu
Print Color Balance Page
Phaser 2135 Color Printer