Managing Profiles; To Back Up Profiles; To Delete Profiles From The Fiery Hard Disk - Xerox Phaser 790 Documentation

Managing Profiles

With Profile manager, you can back up profiles and delete profiles. You
should always back up profiles before updating Fiery software to ensure that
no custom profiles are lost.
You can back up and delete only those profiles that appear in the main Profile
manager window without the lock icon next to them. Locked profiles cannot be
deleted, but most can be backed up.

To Back Up Profiles

1. Launch ColorWise Pro Tools and click Profile Manager.
2. Select the profile on the Fiery to upload.
The arrow in the middle of the Profile Manager window turns green and
points to the left, indicating the profile is available for upload.
3. Click the green arrow, choose a name and location for the profile, and
click Save.
The name will be the filename of the profile, but the profile description
will be the original one or the one you entered in the Profile Settings
dialog box.
When saving the profile on a Windows computer, be sure to include the
extension .icm. If the extension is not included, additional dialog boxes appear.
4. Click OK when you are notified that the profile was successfully
uploaded.
Delete profiles to make sure no one uses the wrong profile and to free
up disk space on the Fiery (although profiles are small and don't take up
much space).

To Delete Profiles from the Fiery Hard Disk

1. Launch ColorWise Pro Tools and click Profile Manager.
2. Select the profile you wish to delete and click Delete.
A Warning dialog box asks you to confirm deletion.
You can not delete preset profiles, profiles that are currently set as default, or
profiles that are linked to any of the predefined custom names, for example
Simulation – 1.
3. Click Yes to delete the profile.
If you want to delete a profile that is currently set as the default or
associated with a custom name, click Profile Settings and uncheck the
default option.
Xerox Phaser 790
22. Using ColorWise Pro Tools
22–15