Setting Up The Printer Cabinet - Xerox Phaser 790 Documentation

Setting up the Printer Cabinet

Setting up the Printer Cabinet (optional)
If you ordered the Printer Cabinet, perform the following steps. If you did not
order the Printer Cabinet, go to the
You will need a phillips screwdriver in order to perform this procedure.
1. Open the carton containing the Printer Cabinet and ensure that you have
received the following items:
2. Locate the bottom panel and lock the four casters.
Xerox Phaser 790
Bottom panel with four casters
Top panel containing many holes
Rear (small) panel
Left side panel with hinge attachments on inside front edge
Right side Panel without hinge attachments
Two hinges
Four wood screws
12 large screws
Two locating pins
One u-shaped locking bracket
1. Setting up the Phaser 790
Installing the 2 Tray Module
0301242A- W O L
procedure.
1-5