Xerox Phaser 790 Documentation page 521

CMYK Simulation Profile
SWOP-Coated/
DIC/Euroscale/Simulation-1/
Simulation-2/Simulation-3/
Simulation-4/Simulation-5/
Simulation-6/Simulation-7/
Simulation-8/Simulation-9/
Simulation-10/None
Electronic Collation
Off/On
Color Mode
CMYK/Grayscale
(from the Mac OS driver)
OR
Standard Color/Expert
Color/Grayscale
(from the Windows drivers)
Copies
1-999
Duplex
Off/Long Edge Binding/Short
Edge Binding
Layout
1-up through 16-up
Xerox Phaser 790
Specify the simulation goal to
be used for the current print
job
.
Specify how to output multiple-
page/multiple-copy jobs.
Specify the color mode for the
current print job.
Select CMYK, Standard
Color, or Expert Color for a
full-color document.
Select Grayscale for a
grayscale or black-and-white
document.
Specify the number of copies
of the job to print.
Specify whether the job should
print one-sided or two-sided
(duplex), by specifying the
orientation of printed images.
Select the Layout print bar and
the desired orientation. Select
the desired Layout setting to
place multiple pages on a
single sheet of paper.
B. Print options
For Windows, select Expert
Color as the Color Mode to
access this option.
More information follows this
table.
This option is not available for
PCL printing.
More information follows this
table.
This option is not available for
PCL printing.
For Windows, you must
select Expert Color to set
other color print options,
including Pure Black Text/
Graphics.
This option is not available for
PCL printing.
Do not enter a value greater
than 999.
The Duplex option cannot be
selected with the 12x18
Paper Size or the
Heavyweight Media Type.
Face-Down Printing must be
set to On and Page Order set
to Forward for all two-sided
jobs.
More information follows this
table.
B–5