Clearing Area 1 Jams - Xerox Phaser 790 Documentation

Clearing Area 1 jams

Clearing Area 1 jams
Perform this procedure when the message Clear Jam in Area 1 is displayed
on the Control Panel.
1. Remove any jammed or torn paper or other stock from Area 1, Bypass
Tray. Ensure that there are no pieces of torn stock remaining in the tray.
2. Remove any stock loaded in the Bypass Tray.
3. In order to access a jam in the transport, pull the Bypass Tray all the
way out of the Pinter.
Xerox Phaser 790
23. Problem Solving
301088a
301089a
301090a
23-7