Working With Custom Page Sizes In Windows 95/98 Or Windows 2000; Defining A Custom Page Size - Xerox Phaser 790 Documentation

Xerox printers documentation

Hide thumbs Also See for Phaser 790:

Table of Contents

Working with custom page sizes in Windows 95/98 or

Windows 2000

With custom page sizes, define the page dimensions and the

unprintable area of the page. You can save three different custom

page sizes for use any time you print.

Custom page sizes are not available from Windows NT 4.0. Although the

user interface differs slightly, the following procedures are the same for both

PostScript and PCL drivers for Windows 95/98 and Windows 2000. The

following examples show the Windows 95/98 PostScript driver.

Select Print from your application.

Select the Fiery Printing tab.

Select the Paper Source print option bar.

Select the Custom button.

Enter the name and the dimensions of the page. Select any other

options that are applicable to the custom page, then select OK.

The new custom page name is displayed in the Page Size drop-

After you define a custom page size, you can use it from within an

application, without having to redefine it each time you print.

Xerox Phaser 790

14. Printing from the Windows workstations