Overview Of Installation; Before You Begin - Xerox Phaser 790 Documentation

10. Installing user software in a Windows 2000 environment

Overview of installation

Installing the Phaser 790 user software includes the following:
Installing the PostScript or PCL printer driver and corresponding
printer description files and setting up the printer driver to
communicate with the printer through the Add Printer Wizard
Setting the printer options
Copying additional files from the User Software CD as needed
Do not install these files using the Installer WebTool.

Before you begin

1. If your system administrator has not already done so, connect the
printer to the desired port on the workstation. For details, refer to
the chapters Connecting to the network and Performing the setup
from the Printer Control Panel.
If you are uncertain what type of network you have, contact your
system administrator.
2. Print a configuration sheet at the printer to obtain the name of the
printer and settings that will be used in the following procedures.
10–2 Xerox Phaser 790