Xerox Phaser 790 Documentation page 59

Installing the Duplex Tray
7. Install the Lower Inverter:
a.
b.
c.
Xerox Phaser 790
Gently squeeze the sides of the Output Tray toward each other in
order to remove the tray from the Printer.
Using the Screwdriver, remove the two screws from lower left-hand
cover of the Printer as shown below.
Remove the cover by shifting it to the right then pulling it away from
the Printer. Discard the cover.
1. Setting up the Phaser 790
0 301053B-WOL
301051b
1-35