Fiery Webtools - Xerox Phaser 790 Documentation

6. Preparing for the setup

Fiery WebTools

The printer can support Internet or intranet access with Fiery
WebTools from Windows 95/98, Windows 2000, Windows NT 4.0,and
Mac OS workstations using the recommended browsers: Internet
Explorer 4.x and higher or Netscape Navigator 4.x and higher.
To enable use of Fiery WebTools, perform the following in Setup:
Enable TCP/IP
Set an IP address, subnet mask and gateway address for the
printer
Enable Web Services
Instead of manually assigning the IP address, subnet mask and
gateway address, you can use DHCP, RARP or BOOTP protocols to
assign some or all of these addresses. Refer to the chapter Performing
the setup from the Printer Control Panel.
Passwords can be set to control access to Fiery WebTools features. If
you do not specifically set these passwords, all users have access to
Fiery WebTools functions.
Fiery WebTools include Status, WebInstall, Web Setup,
WebDownloader, WebSpooler, and WebLink. For more information,
refer to the chapter Using the Fiery WebTools.
6–6 Xerox Phaser 790