Completing The Connection; Parallel Port Printing; To Prepare The Port For Parallel Port Printing In Windows 95 - Xerox Phaser 790 Documentation

Completing the connection

To print from Windows 95/98, ensure the following tasks have been
completed:
Set up network servers, if any
Set up the printer to accept print jobs from the workstation
Configure a port on each Windows workstation for the network

Parallel port printing

Although the procedures for preparing the parallel ports in Windows 95
or 98 are similar, they are not exactly alike, so ensure that you are
using the correct procedures for your operating system.

To prepare the port for parallel port printing in Windows 95

Perform this procedure in Windows 95 only if the LPT1 port is not
currently set to ECP Printer Port.
1. Select the Start button, Settings, and Control Panel.
2. Double-click the System icon to display the System Properties
window.
3. Select the Device Manager tab.
Xerox Phaser 790
9. Installing user software in a Windows 95/98 environment
9–7