4.
Select the Advanced tab.
5.
In the Property list, select Frame Type.
6.
In the Value drop-down list, select the Frame Type that
corresponds to the one set during the Phaser 790 Network Setup.
If necessary, print the Configuration page from the Control Panel
to check which Frame Type(s) are configured.
Do not select Auto because you may not be able to select the
Frame Type specified on the Phaser 790.
7.
Select OK to close the window.
8.
When prompted to restart your workstation, select Yes.
Xerox Phaser 790
9. Installing user software in a Windows 95/98 environment
9–15