Network Setup; Installing The Token Ring Network Card - Xerox Phaser 790 Documentation

3
The information in this chapter is for the customer only.
If you want to install the Print Drivers on their user workstation please go
to the appropriate procedure in this chapter:

Installing the Token Ring Network card

The Token Ring Network Kit is required when setting up a closed loop, or
Local Area Network (LAN). Token Ring Networks can be connected to other
networks, in local and remote locations.
You will need a phillips screwdriver to perform this procedure.
CAUTION
Protect the network card from static electricity by keeping it in the
antistatic bag until you are ready to install it.
Handle the card by the top or side edges only. Do not touch the card
components or the brass connector edge.
Avoid placing the card near magnetic devices, such as a PC monitor.
Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1. Switch OFF the power to the Printer.
2. Disconnect the power cord from the rear of the Printer.
Xerox Phaser 790
Windows 95/98
Windows 2000
Windows NT 4.0
Macintosh OS 5.0

Network Setup

3-1