Xerox Phaser 790 Documentation page 58

Xerox printers documentation

Hide thumbs Also See for Phaser 790:

Table of Contents

1. Setting up the Phaser 790

Using a phillips head screwdriver, remove the screw shown below.

To remove the cover, shift it to the right then pull it away from the

Printer. Discard the cover.

Install the Duplex Tray:

Align the rails on the tray with the rails in the Printer.

Partially close the Duplex Tray and the paper tray.

Installing the Duplex Tray

Xerox Phaser 790