Xerox Phaser 790 Documentation page 66

Xerox printers documentation

Hide thumbs Also See for Phaser 790:

Table of Contents

1. Setting up the Phaser 790

Pinch the Horizontal and Vertical Paper Guides and move them away

from the center of the tray as far as they will go.

Place the right edge of the paper stack against the right metal edge and

under the front right-hand side paper tab as shown below.

Ensure that the paper stack does not cover the MAX guideline.

Adjust the two Paper Guides so that they lightly touch the edges of the

paper stack.

Loading paper in the paper tray

Xerox Phaser 790