Xerox Phaser 790 Documentation page 105

Xerox printers documentation

Hide thumbs Also See for Phaser 790:

Table of Contents

The illustrations are logical diagrams and are not intended to describe

the physical arrangement (topology) of devices on the network.

A variety of physical arrangements is possible with each logical

arrangement.

If the network uses more than one protocol or more than one type of

workstation, combine the setups listed for each component of your

system. Multiple protocols (illustrated as parallel lines) can run on the

same cable. A solid connection from the printer with an arrow indicates

that other supported network types can be operational at the same

The IPX/SPX and TCP/IP functionality outlined in this section is available on

both Ethernet and Token Ring networks. AppleTalk is supported on Ethernet

The protocols used in these diagrams are illustrated as follows:

Xerox Phaser 790

IPX (Novell)

TCP/IP (lpd,

nbt, or http)

5. Connecting to the network