Setting Up The Phaser 790 Chooser - Xerox Phaser 790 Documentation

3. Network Setup
Setting up the Phaser 790 in the Chooser
1. Select Chooser from the Apple menu.
2. Ensure that AppleTalk is set to Active.
3. If necessary, select the AppleTalk Zone that contains your printer.
4. Select the AdobePS icon.
The printer is displayed in the Select a PostScript Printer list in the form
of <server name>_<device name>_<print connection>. The device
name is the internal name of your printer.
5. Perform one of the following:
The Adobe PS printer driver automatically selects the correct PPD file
for your Phaser 790.
6. Perform one of the following:
7. To configure the printer, double-click the printer from the PostScript
Printer list. Select the Configure button and select available options.
Select OK twice.
8. Close the Chooser.
For detailed information about installing Fiery software and fonts; configuring
connections for ColorWise ProTools, Fiery Spooler or Fiery Link; or installing
fonts or additional software, refer to the chapter Installing user software in a
Macintosh OS environment.
3-12
If Desktop printing is on, select a printer connection from the Select
a PostScript printer list and select Create. A printer icon is
created and displayed on the desktop.
If Desktop printing is not on, select the Setup button.
If Desktop printing is on, select the printer icon that is displayed on
the desktop or select the printer in the Chooser list. Select the
Setup button
If Desktop printing is not on, an icon is displayed next to the newly
installed printer in the Chooser list. Select the printer icon and
select the Setup button.
Macintosh OS print drivers
Xerox Phaser 790