Xerox Phaser 790 Documentation page 389

Xerox printers documentation

Hide thumbs Also See for Phaser 790:

Table of Contents

Select the Network Setup button from the WebSetup screen to

display the Network Setup tabs.

If it is not already displayed, select the Port tab and perform the

Xerox Phaser 790

Select the Enable Ethernet check box if the printer is to be

connected to an Ethernet network. If this box is selected, the

Transmission Speed option is enabled and the TCP/IP

Ethernet options listed under the Protocol1 tab are enabled.

Select a Transmission Speed from the drop down box.

Select Auto Detect if your network environment is mixed, or

select the speed (10 Mbps or 100 Mbps) of the network to

which the printer is attached. Changing the speed requires

rebooting the server.

To deselect the option, ensure there is no check mark in the

21. Performing the setup from WebSetup