Print Options Table - Xerox Phaser 790 Documentation

Print options table

Options and settings
(Default setting underlined)
(Other) Gamma
Printer default/1.0/1.2/1.4/1.6/
1.8/2.0/2.2/2.4/2.6/2.8/3.0
(Other) Phosphors
Printer default/Hitachi EBU/
Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
(Other) White Point
Printer default/5000 K (D50)/
5500 K/6500 K (D65)/7500
K/9300 K
Xerox Phaser 790
Description
Specify a source gamma value
for printing RGB images,
objects, and text.
Specify a source phosphors
value for printing RGB images,
objects, and text.
Specify a source white point
value for printing RGB images,
objects, and text
B. Print options
Requirements, constraints,
and information
Setting this option to Printer
default produces the same
result as the 2.2 setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing.
Setting this option to Printer
default produces the same
result as the SMPTE setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing
Setting this option to Printer
default produces the same
result as the 5000 K (D50)
setting.
To enable this option, RGB
Source Profile must be set to
Other.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing
B–3