Enabling/Disabling Automatic Color Registration; Adjusting Color Registration - Xerox Phaser 6125 Service Manual

Enabling/Disabling Automatic Color Registration

Adjusting Color Registration

Phaser 6130 Color Laser Printer Service Manual
This procedure provides instructions for how to enable or disable the
Automatic Color Registration function after a new Imaging Unit is installed.
If the function is set to On, the printer will calibrate the color alignment
every time it detects a new Imaging Unit.
If the function is set to Off, calibration will not occur. This allows users to
save toner.
To enable or disable the Automatic Color Registration:
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button find
OK button.
5. Press the Up Arrow or Down Arrow button to turn automatic color
registration On or Off.
Color Registration can be automatically or manually adjusted.
Determining the Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan)
pattern, find the values of the straightest lines.
When "0" is the value nearest the straightest line, you do not need to adjust
the color registration. When the value is not "0," refer to "Manual Color
Registration Adjustment" on page 6-4.
Auto Adjustment
1. From the Control Panel, press the Menu button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find
Press the OK button.
4. Press the Up Arrow or Down Arrow button find
Press the OK button.
5. The Auto Adjust
6. Are you sure?
Auto Adjustment procedure.
7. The printer starts the auto Color Registration process.
8. When the auto Color Registration is completed, the
displayed.
menu is displayed. Press the OK button.
message is displayed. Press the OK button to start the
Adjustments and Calibrations
Admin Menu. Press
Maintenance Mode.
Adjust Regi. Press the
Admin Menu. Press
Maintenance Mode.
Adjust Color Regi.
Ready menu is
6-3