Setting Options And Printing From Windows 2000 - Xerox Phaser 790 Documentation

Setting options and printing from Windows 2000

After you have installed the Windows 2000 PostScript printer driver
and PPD file, specify print settings for a particular job and print it.
PCL printing is not supported for Windows 2000.
You can install and use the PCL drivers and PDD files provided on the User
Software CD to print from Windows 95/98 and Windows NT 4.0 systems.
Refer to the appropriate Installing user software chapters and Printing
from Windows workstations for information on installing and printing with
the Windows 95/98 and Windows NT 4.0 drivers.
To set print options and print from Windows 2000 using the PostScript
printer driver:
1. Select Print in your application.
2. Select the Phaser 790, then set print options for the job by
selecting Properties (if necessary) and the print option tabs.
3. Select the Advanced button on the Layout or Paper/Quality tab to
display the Advanced Options dialog box.
4. Select a setting from the Paper Size drop-down list menu.
5. Scroll to Printer Features and select the appropriate settings for
the print job.
These print options are specific to the printer. They override
settings in Printer Setup, but can be changed using the Command
WorkStation. For information about these options and overrides,
refer to chapters Introduction to the Command WorkStation.
As you select print options, incompatible print settings are
displayed with a caution icon next to their names. If you specify
incompatible print settings the Incompatible Print Settings dialog
box is displayed. Follow the on-screen instructions to resolve the
conflict.
Xerox Phaser 790
14. Printing from the Windows workstations
14–7