Job Log Window - Xerox Phaser 790 Documentation

16. Introduction to the Command WorkStation

Job Log window

The Job Log is a list of processed and printed jobs, the date and time
they were processed or printed, and the characteristics of the job. It
includes downloaded files and fonts and RIP and Hold jobs.
The Job Log window is not available if you logged in as Guest.
At any given time, the Job Log includes only those jobs processed or
printed since the Job Log was last cleared. The Job Log can be
cleared manually by selecting Clear Job Log from the Server menu or
automatically if the administrator has enabled autoclearing of the Job
Log in Setup. The Job Log is also cleared by selecting Clear Server
on the Printer Control Panel or by selecting the Clear command from
the Command WorkStation.
You can adjust the column widths in the Job Log display by selecting
the column border in the heading and dragging left or right. For more
information, refer to the chapter Managing print jobs at the Command
WorkStation.
When you open the Job Log, you can select to display all jobs in the
current Job Log or only the jobs in a specified date range. By default,
all jobs are displayed.
16–30 Xerox Phaser 790