1. Setting up the Phaser 790
Space requirements
CAUTION
The Xerox Phaser 790 has ventilation grilles on the side and rear, which
must remain unobstructed for safe operation. The Printer should be located
at least 6 and 1/2 inches (165 mm) from the wall. Obstructing the grilles
could present a fire hazard.
Using the space requirements illustrated below ensures that the Printer has
the ventilation it requires. It also ensures that you have the space needed for
replacing the supplies.
Space requirements for the Phaser 790 Printer
The following illustration is a view of the printer from above.
1-2
6.5 Inches 165 mm
18 Inches
457.2 mm
36 Inches
63 Inches
1600 mm
Preparing for the installation
23 Inches
584.2 mm
914.4 mm
67 Inches
1702 mm
0
301000B-WOL
Xerox Phaser 790