Connecting To A Wireless Network Using The Control Panel; Setting Up The Printer For Wireless Lan Wpa2 Enterprise - Xerox Phaser 6510 User Manual

12. To activate your changes, at the prompt, click Restart Now.
13. Disconnect the Ethernet cable from the printer.
Note: When the printer restarts, it uses the information from the Embedded Web Server to connect
with the wireless router.
14. After the printer restarts, wait two minutes, then to get the network information that includes the
IP address, print a Configuration Report. For details, refer to
page 29.
15. If the printer does not successfully connect with the wireless network, check your network
information and try again.

Connecting to a Wireless Network Using the Control Panel

You can connect to a wireless network manually using the printer control panel. For details, refer to
Connecting to a Wireless Network Manually

Setting Up the Printer for Wireless LAN WPA2 Enterprise

WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in the
Wi-Fi settings section.
Note: To manage digital certificates, enable HTTPS communication.
1. Import the required security certificate. For details, refer to
page 209.
Note: Use Internet Explorer to import the certificate from Windows. Use Safari to import certificates
from Macintosh.
2. Verify the Certificate Authorities within the category. For details, refer to
Certificate Purpose
3. Configure WPA2 Enterprise. For details, refer to
page 153.
Configuring WPA2 Enterprise Authentication
Note: WPA-Enterprise settings are unique for each network. For details on your settings, contact
your network administrator.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
Click Connectivity.
2.
Note: If this feature does not appear, log in as a system administrator. For details, refer to
In as the Administrator
For Connections, click Wi-Fi.
3.
4. Enter the SSID.
5. For Network Type, select an option.
6. Verify the TCP/IP Settings.
7. For Security Settings, select an Encryption option, then enter the required information.
8. Click OK.
on page 45.
on page 210.
on page 186.
Printing the Configuration Report
Importing a Digital Certificate
Configuring WPA2 Enterprise Authentication
Xerox Phaser
®
System Administrator Functions
on
Verifying the Digital
on
Logging
6510 Color Printer
®
User Guide
on
153