Summary - Nikon Scanners Software Reference Manual

Chapter 8
Clicking on the L
S F
THE ETTINGS ILE
opened, the state stored in the named file will be loaded in as the current state of the
plug-in. Any changes made to this file can be saved through the S
ton. Make sure, however to give this state a different name if you also wish to retain the
original settings file.
Figure 8.7 The S

Summary

To save the current state to a named file:
• Click on the S
To change the current state to the state in a named file:
• Click on the L
Software Reference for Scanners
Setting and Restoring the Nikon Plug-in State – Macintosh
S button prompts the appearance of the S
OAD ETTINGS
dialog, as shown in Figure 8.7. Once the settings file is selected and
S
ELECT THE ETTINGS
S button.
AVE ETTINGS
S button.
OAD ETTINGS
S
AVE
F dialog.
ILE
ELECT
but-
ETTINGS
Page 77