Height; Width And Height Units; Final Resolution - Nikon Scanners Software Reference Manual

Chapter 11
Figure 11.3b The W

Height

The H setting, as shown in Figure 11.4 for Macintosh and Figure 11.4b
EIGHT
under Windows, determines the horizontal dimension of the final scan. Again, this
assumes that the film orientation is correctly selected for the image to be scanned.
Figure 11.4a The H
Figure 11.4b The H

Width and Height Units

The units of measure for width and height are selectable. They can be defined as
pixels, inches, cm, mm, picas or points. This is shown in Figure 11.5.
Figure 11.5 Selecting the units of measure for W
Macintosh and Windows.

Final Resolution

The F R
INAL ESOLUTION
scan, or the output resolution. The value of this setting will determine the scan P
For example, if you decide that you want a F
or ppi, the P setting will automatically be set to scan at the appropriate setting, or
ITCH
input resolution.
Software Reference for Scanners
Cropping and Sizing Images
setting – Windows.
IDTH
setting – Macintosh.
EIGHT
setting – Windows.
EIGHT
determines the number of pixels per unit area in the final
R
INAL ESOLUTION
or H –
IDTH EIGHT
of 300 pixels per inch,
.
ITCH
Page 95