Nikon Scanners Software Reference Manual page 193

starts to use virtual memory when there is no more RAM available. In this case, you
will notice an increase in disk activity and a decrease in overall scanning speed.
• Problem: My SCSI hard disk is unreliable since I installed Coolscan.
Action: You should be interfacing Coolscan with the included SCSI controller
card. Nikon cannot guarantee compatibility with every ASPI-compliant SCSI controller
card and hard disk driver software. You will not see any speed increase by using a differ-
ent SCSI controller card, as the included SCSI card can receive image data faster than
Coolscan can generate it.
Problem: I get a system error when I'm scanning.
Action: Make note of the exact error message that appears, then contact Nikon
Technical Support. It will help if you have the following file information in front of
you before you call:
Contents of:
Config.sys
Autoexec.bat
Win.Ini
• Problem: I am getting an error code 203 or 208 while scanning with Coolscan.
Action: Enable the jumper on the Trantor T-130 SCSI Controller Card for "Zero
Wait States" and/or assign an interrupt. Please contact Nikon Technical Support if you
require assistance.
• Problem: Communication with my internally-mounted Coolscan seems
erratic.
Action: Contact Nikon Technical Support for instructions on enabling termina-
tion power on Coolscan internal models.
Software Reference for Scanners
Troubleshooting – Windows
Page 179