Save Settings; The Automatic Method; Summary - Nikon Scanners Software Reference Manual

Chapter 9
Figure 9.4 The L

Save Settings

The S S
AVE ETTINGS
current plug-in state to a user-named file. These settings can then be recalled through
the L S
OAD ETTINGS
Figure 9.5 The S

The Automatic Method

Suppose that you have performed a scan of a particular image. The resulting scan
file is imported into a desktop publishing application. Now suppose you want to
change the crop of the image. The Nikon Scanner plug-in is then run again. The same
settings that existed when you exited the plug-in are automatically in place. The pre-
view image of the film is still present, as well. This saves you a great deal of time, as the
only operation required is to change the crop. All other settings are identical. Only
under any of the following conditions would there be the need for a new preview scan to
be performed:
• The film was moved inside the scanner since the last preview scan.
• The film was removed from the scanner manually, or electronically ejected.
• The scanner's power was turned off.

Summary

To automatically save the state:
• Exit the Nikon Scanner plug-in through the S
To automatically restore the state:
• Run the plug-in again.
Software Reference for Scanners
Setting and Restoring the Nikon Plug-in State – Windows
S button.
OAD ETTINGS
button, shown in Figure 9.5, provides a means to store the
button.
S button.
AVE ETTINGS
button.
CAN
Page 81