Chapter 5
Getting Started on the IBM PC or Compatible
Launching the Software
Before launching the scanning software make sure that your scanner is powered
on. Power on is indicated by a solid green illuminated LED on the scanner's front
panel.
If you are using a third-party imaging application you will need to access the
Nikon Scanner plug-in from the
ware, the dialog will appear automatically.
If you are using a third-party imaging application, pull down the F
access the appropriate menu item used by that application for scanning input. Then,
select N
S
IKON
CANNER
lowing messages appear on your screen.
After a moment, the following message will appear:
The Nikon Scanner plug-in is now attempting to establish connection with the
scanner.
The Main Scan dialog will then appear.
Software Reference for Scanners
Getting Started on the IBM PC or Compatible
menu. If you are using the Nikon Control soft-
F
ILE
... from the submenu. Once launched you should see the fol-
menu to
ILE
Page 33