The Settings Controls; Use Defaults; Set Defaults; Load Settings - Nikon Scanners Software Reference Manual

Setting and Restoring the Nikon Plug-in State – Windows
storage of settings. This is shown in Figure 9.1c. Several different states can be stored
by giving each a unique name. The plug-in saves the current settings to a named file
when the S
AVE
those settings in a named file when the L

The Settings Controls

There are four buttons associated with the saving and restoring of the plug-in
state. These include the U
S buttons. All of these are found in the Scan dialog.
ETTINGS

Use Defaults

The U
SE
plug-in state to the default values in the plug-in's NKNCTRL.INI file. These default
values can be changed by clicking the S
Figure 9.2 The U

Set Defaults

The S D
ET
rent plug-in settings as the default state in the NKNCTRL.INI file. After these new
default settings are stored, they can then be recalled by clicking the U
ton.
Figure 9.3 The S

Load Settings

The L
OAD
plug-in state to the values in a user-named settings file. These values can be set by click-
ing the S S
AVE ETTINGS
Page 80
S button is clicked. Similarly, it resets the current settings to
ETTINGS
OAD
D , S
SE EFAULTS
D button, shown in Figure 9.2, provides a means to set the
EFAULTS
ET
D button.
SE EFAULTS
button, seen in Figure 9.3, provides a means to store the cur-
EFAULTS
D button.
ET EFAULTS
S button, shown in Figure 9.4, provides a means to set the
ETTINGS
button.
S button is clicked.
ETTINGS
D , L S
ET EFAULTS OAD ETTINGS
D button.
EFAULTS
Software Reference for Scanners
Chapter 9
and S
AVE
D but-
SE EFAULTS