The Settings Controls; Reset; Set Defaults; Load Settings - Nikon Scanners Software Reference Manual

Setting and Restoring the Nikon Plug-in State – Macintosh
The user-named method is similar to the set default method, but is meant for long-
term storage of settings. This is shown in Figure 8.1c. Several different states can be
stored by giving each a unique name. The plug-in saves the current settings to a named
file when the S
AVE
to those settings in a named file when the L

The Settings Controls

There are four buttons associated with the saving and restoring of the plug-in
state. These include the R
buttons. All of these are found in the Scan dialog.

Reset

The R
ESET
to the default values in the plug-in preferences file. These default values can be changed
by clicking the S
Figure 8.2 The R

Set Defaults

The S D
ET
rent plug-in settings as the default state in the preferences file. After these new default
settings are stored, they can then be recalled by clicking the R
Figure 8.3 The S

Load Settings

The L
OAD
plug-in state to the values in a user-named settings file. These values can be set by click-
ing the S S
AVE ETTINGS
Figure 8.4 The L
Page 74
S button is clicked. Similarly, it resets the current settings
ETTINGS
, S D
ESET ET EFAULT
button, shown in Figure 8.2, provides a means to set the plug-in state
D button.
ET EFAULTS
button.
ESET
button, seen in Figure 8.3, provides a means to store the cur-
EFAULTS
D button.
ET EFAULTS
S
button, shown in Figure 8.4, provides a means to set the
ETTINGS
button.
S button.
OAD ETTINGS
S button is clicked.
OAD ETTINGS
, L S and S
OAD ETTINGS
button.
ESET
Software Reference for Scanners
Chapter 8
S
AVE ETTINGS